Oil & Gas | inspect by FalconViz

What inspect Delivers

Every service, laid out in full.

01 Digital Twin, Anomaly Detection & Inspection Checklists

A persistent 3D model of every flare stack, tank, pipeline and platform, rebuilt each cycle with anomalies flagged and logged against an inspection checklist.

Asset types covered.Flare stacks, storage tanks, pipelines, offshore platforms.

Detects on every pass.Corrosion, leaks, insulation damage, structural deformation.

Inspection checklists.Checklist items sit on the 3D model, each linked to the detection and image behind it.

Every cycle compared.Every flight is compared with the last, with alerts when a finding crosses your threshold.

Assets and detections

Flare StacksStorage TanksPipelinesOffshore PlatformsCorrosionLeaksInsulation DamageStructural Deformation

Flare tip close-up with coating loss and corrosion marked

02 Flare & Stack Survey

Flare tips, stacks and supports surveyed visually and thermally from the air, without waiting for a shutdown or putting someone on a rope.

Tip and shell condition.Flare tip, pilot area, stack shell, ladders and platforms captured close-up and checked for corrosion, damage and coating loss.

Thermal pass.Thermal imaging of stack surfaces and supports to show heat damage and hot spots, flown within the limits of your operating conditions.

Geometry checked against the last survey.Lean and deformation compared with the previous cycle from the 3D model.

Defects located on the asset.Every finding is placed on the stack elevation with its source image.

Assets and detections

Flare TipStack ShellLadders & PlatformsSupportsCorrosionHeat Damage

Flare stack elevation with defects marked

03 Tank Shell Corrosion Mapping

Tank shells and roofs mapped for coating failure and corrosion, with visual and thermal passes reconciled into one record per tank.

Full shell and roof coverage.Every tank captured on the same repeatable route so defects can be compared cycle to cycle.

Visual and thermal fusion.Two capture modes reconciled into a single defect record per tank.

Trend tracking.Corrosion and coating loss tracked across inspection cycles, so a developing problem shows as a trend and not a surprise.

Repair planning input.Findings ranked per tank so follow-up inspection and repair start in the right place.

Assets and detections

Tank ShellTank RoofCoating FailureCorrosionLeak Staining

Tank shell with corrosion and coating loss zones outlined

04 Confined-Space Inspection

Interiors of tanks and vessels captured with a collision-tolerant drone or a 360° camera, so internal condition is documented before anyone enters.

Internal capture.Collision-tolerant drone or 360° camera for GPS-denied interiors, where the space and equipment allow.

Internal defect logging.Coating condition, corrosion, weld areas and floor condition visible in the imagery are logged and placed on the model.

Entry planning.The record shows entry crews where to look, so time spent inside is shorter and more targeted.

Walkthrough record.The full interior stays on file as a navigable record for the next cycle.

Assets and detections

Tank InteriorsVesselsCoating ConditionCorrosionFloor Condition

Tank interior frame with coating failure marked

Included on every inspect deployment

Evidence-linked findingsPDF and CSV reportsThreshold alertsFull audit trail

Built from the ground up by FalconViz. inspect is open to customization. If you need a detection that is not listed here, we can build it around your assets and your standards. Discuss a custom detection →

Inspect what you can't safely climb.

Every service, laid out in full.

See critical assets inspected on your own site.